26
12 VAC power adaptor. Only use the included PSU. When connecting the power cord, please
make sure the power of the unit is off. Connect the cord to the rear of the mixer and then
connect it to the mains outlet.
27
Headphones input connection.
5. Cleaning and Maintenance
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections,
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
6. Technical Specifications
power supply
power consumption
audio inputs
mic
phono
line
S/N ratio
crosstalk
THD
frequency response
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.hqpower.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
19.11.2009
PROMIX50U
PSU
SIDE PANEL
230 VAC ~ 50 Hz
5 W
20 mV, unbalanced
15 mV/1k Hz, unbalanced
0.8 V, unbalanced
> 80 dB (line in)
> 50 dB (line in)
< 0.025 %
20 Hz ~ 20k Hz
235 x 60 x 135 mm
0.95 kg
5
©Velleman nv