Descargar Imprimir esta página

LG WM2901H A Serie Guía Del Usuario E Instrucciones De Instalacion página 9

Ocultar thumbs Ver también para WM2901H A Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTA[/MION INST UcTIONS
cHOOSE THE PROPER LOcATiON
WARN|NG
• Washer is heavy! Two or more people
are required
when moving and unpacking
the washer. Failure to do so can result in back
or other injury.
= Store and install the washer where it will not
be exposed
to temperatures
below freezing
or exposed
to outdoor weather conditions.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• Properly
ground washer to conform
with all
governing
codes and ordinances.
Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• To reduce the risk of electric
shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
= DO not remove ground prong. Do not use
an adapter
or extension
cord. Plug into a
grounded
3=prong outlet. Failure to follow this
warning can cause serious injury, fire, electrical
shock, or death.
Power
Outlet
= The power outlet must be within 60 in. (1.5 m) of
either side of the washer.
The appliance and outlet must be positioned so
that the plug is easily accessible.
Do not overload the outlet with more than one
appliance.
The outlet must be grounded in accordance
with
current wiring codes and regulations.
Time-delay fuse or circuit breaker is
recommended.
NOTE: it is the personal responsibility
and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
CLEARANCES
222/4"_
(57.5 cm)
0
IL:1111
_" _:-111111
I-"_
293/4" _
-"_4"
(75,6 om)
(10 om)
521/4''
(133 cm)
m
g
0
27"
(2.5 cm)
(68.6 cm)
(2.5 cm)
To ensure sufficient clearance for water lines and
airflow, allow minimum clearances of at least
1 in. (2.5 cm) at the sides and 4 in. (10 cm)
behind the unit. Be sure to allow for wall, door,
or floor moldings that may increase the required
clearances.
Allow at least 24 in. (61.2 cm) in front of the
washer to open the door.
9

Publicidad

loading