Technical Specifications - KREAFUNK toCHARGE MINI Manual De Instrucciones

4. F&Q
4.1 Why is the toCHARGE power
bank not charging?
• The cable is not properly
connected.
• The charger is not switched
on correctly.
• The power bank is already
fully charged.
• The USB cable is not
compatible with the power
bank because it is not the
original cable.
4.2 Why is charging often
interrupted, and how to continue
charging?
• The charging current is
too much. The toCHARGE
MINI power bank performs
over-current protection.
Disconnect the Power bank.
Reconnect the power bank.
After reconnecting the
charging starts again.
10
Start short circuit protection. After
reboot, the charging will continue.
4.3 Why can't some digital devic-
es charge?
• Ensure that the charging
voltage of the device is 5V.
• The device might not be
compatible with the power
bank.
5. TECHNICAL
SPECIFICATIONS
Capacity: 3000mAh
Battery type: Lithium 18650
Number of batteries: 1 pcs
Conversion efficiency: 80%
Charging time: 3 hours
Input: 5V 1A
Output: 5V 1A (max)
Cycle life: More than 500 times
Surface: Fluff paint + plastic
USB output: Single USB
Dimensions: 85x45.5x26mm
Weight: 68g
English