MTD 760 Manual Del Operador página 13

Clutch-Brake Pedal
The clutch-brake pedal is located on the left side of the
lawn tractor, along the running board. Depress the
clutch-brake pedal part way down when slowing the
tractor by changing speeds (Refer to Speed Control L ever).
Depress the pedal all the way down to engage the disc
brake and bring the tractor to a complete stop.
NOTE:
The pedal must be depressed to start the
engine. Refer to SafetyInterlockSwitches on page 14.
ShiftLever
The shift lever is located on the left side of the fender
and has three positions, FORWARD, NEUTRAL and
REVERSE. The brake pedal must be depressed and
the tractor must not be in motion when the moving shift
lever. See Figure 9.
4_
:8RWARD
MUETRAL
REVERSE
Shift Knob
Figure 9
IMPORTANT: Never force the shift lever. Doing so may
result in serious damage to the tractor's transmission.
IgnitionSwitch Module
WARNING: Never leave a running machine
unattended. Always disengage PTO, move
shift lever into neutral position, set parking
brake, stop engine and remove key to prevent
unintended starting.
To start the engine, insert the key into the ignition
switch and turn clockwise to the START position.
Release the key into the NORMAL MOWING MODE
position once the engine has fired.
To stop the engine, turn the ignition key
counterclockwise to the OFF position. See Figure 10.
Stop
Position
NO CHILDREN AROUND
REVERSEPUSH
BUTTON"_
Normal
MowingMode
Start
Position
Figure 10
IMPORTANT: Prior to operating the tractor, refer to both
SafetyInterlock Switcheson page 14 and StartingThe Engine
on page 15 of this manual for detailed instructions
regarding the Ignition Switch Module and operating the
tractor in REVERSE CAUTION MODE.
13