Hilti SL 6-A22 Manual De Instrucciones Original página 19

If the LEDs of the charge state indicator flash, follow the instructions in
the 'Troubleshooting' section.
3.4 Items supplied
Cordless lamp, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.5 4-mode switch
Use the 4-mode switch to set brightness.
Status
Press once
Press twice
Press three times
Press and hold down for several
seconds
The brightness setting last selected is used again the next time the lamp
is switched on.
4 Technical data
Voltage
Brightness
Weight
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
*2195844*
Meaning
The lamp shines at maximum
brightness (100 %).
The lamp shines at reduced bright-
ness (66 %).
The lamp shines at reduced bright-
ness (33 %).
The lamp is off.
2195844
SL 6-A22
21.6 V
3,000 lm
3.2 kg
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English 15