Publicidad
SCOPE OF DELIVERY
Intenso Magne琀椀c Wireless Charger MB1/MW1
1
Power supply HP8
2
Please check whether the packaging contents (see also diagram at the beginning of
the manual) are complete and undamaged. If this is not the case, please contact the
seller or our service department:
rma@intenso-interna琀椀onal.de
USE
Start-up / charging compa琀椀ble devices
Step 1: Prepara琀椀on
Connect the integrated USB-C cable to the power supply unit and next connect the
power supply unit to a power socket (observe the safety instruc琀椀ons).
Step 2: Start charging
Posi琀椀on your Qi-compa琀椀ble device in the centre of the induc琀椀ve charging sta琀椀on.
The charging process starts automa琀椀cally.
If this is not the case, please check
a.
whether your device is Qi-compa琀椀ble
b.
whether there is a foreign object between the devices or you are using an
unsuitable case.
c.
whether you have chosen the enclosed power adapter or a di昀昀erent but com-
pa琀椀ble one. If this is not the case, replace it accordingly. If this is the case,
please disconnect it from the power supply for a few seconds and reconnect
it to start the charging process.
d.
whether the cable ends and the power supply unit are correctly connected.
e.
where the correct wireless charging posi琀椀on is on your device. You may need
to reposi琀椀on it.
Please note that the ambient temperature and the charging electronics of the device
to be charged have an e昀昀ect on the charging behaviour over which the induc琀椀ve
charging sta琀椀on itself has no in昀氀uence. For example, the charging speed may be
reduced at increased temperatures or when charging levels have already been rea-
ched.
Step 3: End charging process
To end the charging process, simply remove your device from the induc琀椀ve charging
sta琀椀on.
Instruc琀椀on manual
3
EN - Page 4 of 5
Publicidad
