Intenso WIRELESS CHARGER BSA2 Manual Del Usuario página 12

USE
Device overview
1 - Status LED
2 - USB-C IN
Opera琀椀on
LED status display
The current opera琀椀ng status of the device is indicated by the status LED. If you connect the
device to a connected power supply unit, the LED 昀氀ashes green once and blue once as con昀椀rma琀椀on and
then remains o昀昀. If a charging process is started, the LED lights up blue con琀椀nuously. When the terminal is
fully charged, the LED usually changes from blue to green (depending on the charging device). If the LED
昀氀ashes blue quickly, there is an error – for example, the device is not posi琀椀oned correctly, it has become
too hot, there is a foreign object between the devices or an incompa琀椀ble power supply unit is being used.
Start-up / charging compa琀椀ble devices
Step 1: Prepara琀椀on
Connect the supplied USB-C to USB-C cable to the USB-C port (IN) of the induc琀椀ve charging sta琀椀on and
connect the other end of the USB cable to the power supply unit. Next, connect the power supply unit to a
power socket (follow the safety instruc琀椀ons).
Step 2: Start charging
Place your Qi-compa琀椀ble device in the centre of the induc琀椀ve charging sta琀椀on; you can choose either a
horizontal or ver琀椀cal orienta琀椀on. The charging process starts automa琀椀cally, and the status LED lights up
blue con琀椀nuously.
If this is not the case, please check
a. whether your device is Qi-compa琀椀ble
b. whether there is a foreign object between the devices or you are using an unsuitable case.
c. whether you have chosen the enclosed power adapter or a di昀昀erent but compa琀椀ble one. If this is
not the case, replace it accordingly. If this is the case, please disconnect it from the power supply for
a few seconds and reconnect it to start the charging process.
d. whether the cable ends and the power supply unit are correctly connected.
e. where the correct wireless charging posi琀椀on is on your device. You may need to reposi琀椀on it.
Please note that the ambient temperature and the charging electronics of the device to be charged have
an e昀昀ect on the charging behaviour over which the induc琀椀ve charging sta琀椀on itself has no in昀氀uence. For
example, the charging speed may be reduced at increased temperatures or when charging levels have
already been reached.
Step 3: End charging process
To end the charging process, simply remove your device from the induc琀椀ve charging sta琀椀on.
1
EN - Page 4 of 5
2