Ashdown Engineering PRO DI Guia Del Usuario página 4

ASHDOWN ENGINEERING - PRO DI
USER GUIDE
Output
The output level control sets the signal level and should be set so that the following
coneted equipment such as the mixing desk or amplifier is not overloaded.
This control also adjusts the volume level when monitoring via Headphones.
Auxiliary Inputs
There are two auxilliary inputs suitable for line level signals , the first of these is a ¼"
jack, this willaccept a sterio signal which will be mixed into mono within the pedal
, or a mono signal from a bass pedal or synth for example . The Aux signal has an
independent mix control and is mixed with the primary Bass instrument signal after
the EQ, Shape and Drive circuits.
The second Aux input is also sterio mixed to mon on a 3.5mm jack and can be used
for signals from a phone for example to facilitate practice sessions e.t.c.