Husqvarna HG 125 B Manual Original página 22

drivers or by force applied externally.
An internal short circuit may occur, causing the
battery to burn, smoke, explode or overheat.
Only use the AMPShare battery in the
u
manufacturer's products or those of the
AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Protect the battery against
heat, e.g. against continuous in-
tense sunlight, fire, dirt, water
and moisture. There is a risk of ex-
plosion and short-circuiting.
Product Description
and Specifications
Read all the safety and general
instructions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or seri-
ous injury.
Please observe the illustrations at the beginning of
this operating manual.
Intended use
English
The power tool is intended for cutting, roughing
and brushing metal and stone materials, as well as
making holes in stone materials using diamond
core cutters, without the use of water.
A separate protective guard for cutting must be
used when cutting with bonded abrasives.
Sufficient dust extraction must be provided when
cutting stone.
With approved abrasive tools, the power tool can
be used for sanding with sanding discs.
The power tool must not be used to grind con-
crete.
Product Features
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Spindle lock button
(4) On/off switch
(5) Rechargeable battery
(6) Battery release button
(7) Auxiliary handle (insulated gripping surface)
(8) Extraction guard for grinding
(9) Protective guard for grinding
(10) Protective guard for cutting
22 | English
English
English
a)
a)
a)
a)
(11) Mounting flange with O-ring
(12) Carbide grinding head
a)
(13) Abrasive disc
a)
(14) Cutting disc
(15) Quick-clamping nut with bar
(16) Handle (insulated gripping surface)
(17) Grinding spindle
a)
(18) Rubber sanding pad
a)
(19) Abrasive disc
a)
(20) Round nut
a)
(21) Cup brush
a)
(22) Diamond core bit
(23) Extraction guard for cutting with cutting
a)
guides
(24) Diamond cutting disc
a)
(25) Flap disc
a) Accessories shown or described are not in-
cluded with the product as standard. You
can find the complete selection of accessor-
ies in our accessories range.
Technical Data
English
Angle grinder
Article number
Rated voltage
Rated speed
No-load speed
Max. grinding disc dia-
meter
Grinding spindle thread
Max. thread length of
grinding spindle
Kickback stop
Restart protection
Run-out brake
Weight according to
EPTA-Procedure
01:2014
Recommended ambient
temperature during
charging
Permitted ambient tem-
perature during opera-
A)
tion and during storage
Compatible re-
chargeable batteries
Recommended char-
gers
A) Limited performance at temperatures < 0 °C
a)
a)
HG 125 B
970 552 401
V = 18
-1
min 11000
-1
min 9800
mm 125
M 14
mm 22
Yes
Yes
Yes
kg 3.1
°C 0...+35
°C –20...+50
18V80
GAL 18V-160
1 609 92A 6WV • 26.8.22