Publicidad
Idiomas disponibles
Idiomas disponibles
Installing Your ICSA
System
WARNING!
Failure to attach ICSA
securely to wagon may result
in serious injury or death.
ATTACHING ICSA TO WAGON
Prepare Wagon
(A) Set parking brake.
(B) Unfold wagon.
(C) Retract canopy, if installed.
NOTE: For more information see
wagon user guide.
1.
Locate yellow locking pins.
Identify the locking pins located
on each side of the wagon.
2. Attach the Adapter
Place the adapter next to the
single pins, slide the adapter
forward, towards the handle, until
it stops. Then push down on the
two (2) yellow buttons on both
sides.
NOTE: A "click" confirms secure
attachment.
3. Check attachment
Pull up on both sides of the ICSA
to confirm secure attachment.
Single
locking pin
Single
locking pin
7
Publicidad
