Publicidad
Idiomas disponibles
Idiomas disponibles
EN
BEFORE FIRST USE
1. Remove all packaging materials and stickers or labels.
2. Clean the basket and oil catch plate with hot water, with some
washing liquid and a non-abrasive sponge. These parts are safe to be
cleaned in dishwasher.
3. Wipe inside and outside of the appliance with a cloth. There is no
need to fill the plate with oil and frying fat as the appliance works on
hot air.
PREPARING FOR USE
Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
USING THE APPLIANCE
This appliance is able to prepare a huge range of dishes, you may get
help from the recipe book.
HOT AIR FRYING
1. Connect the main plug into an earthed wall socket.
2. Use the basket handle and pull the basket out of the air fryer.
3. Place the ingredients in the basket.
NOTE: do not exceed the MAX indication (see section 'settings' in
this chapter), as it may affect the quality of the food.
4. Slide the basket back into the Air fryer and close it.
5. Set the temperature to the proper temperature. See section
'Settings' in this chapter to determine the right temperature.
6. Determine the required preparation time for the ingredient (see
section 'Settings' in this chapter).
7. To switch on the appliance, set the time to the required preparation
time.
6
Add 3 minutes to preparation time if the appliance is cold.
NOTE: if you want, you can also preheat the appliance without any
ingredients inside.
In that case, Set the time for more than 3 minutes and wait until the
heating-up light goes out (after about 3 minutes). Then fill the basket
and set the time to the required preparation time, then pressed start.
a. Screen starts counting down the set preparation time.
b. During the hot air frying process, the heating-up light goes on and
goes out from time to time. This indicates that the heating element is
switched on and off to maintain the set temperature.
8. Some ingredients require to shake halfway during the preparation
time (see section 'Settings' in this chapter). For this purpose, pull the
basket out of the appliance by the handle and shake it. Then slide the
basket back into the air fryer.
TIP: if you set the time to half of the preparation time, you have
to shake the ingredients when you hear the bell ringing. However,
this means that you have to set the time again to the remaining
preparation time after shaking.
9. When you hear the bell ringing, the set preparation time has
elapsed. Pull the basket out of the appliance and place it on the heat-
resistant surface.
10. Check if the ingredients are ready. If the ingredients are not ready
yet, simply slide the basket back into the appliance and set the timer
to a few extra minutes.
11. Empty the basket into a bowl or onto a plate.
TIP: to remove large or fragile ingredients, lift the ingredients out of
the basket by a pair of tongs.
12. When a batch of ingredients is ready, the air fryer is instantly ready
for preparing another batch.
7
EN
Publicidad
