GreenWorks WDV40L410 Manual Del Operador página 8

EN
8.4 INSERT THE HOSE
8
10
1. Align either of the grooves (10) in the tube with the
tabs on the hose.
2. Insert the locking end of the hose into the vacuum
port (8) and turn clockwise to lock into place.
3. Insert your desired accessory (11/12) onto the end
of the hose securely.
To remove the hose, turn the locking end of the hose
counter-clockwise.
11
12
NOTE
English
8.5 INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Open the battery door.
2. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment
until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
8.6 REMOVE THE BATTERY PACK
1. Open the battery door.
2. Push and hold the battery release button (13).
3. Remove the battery pack from the machine.
9 OPERATION
Do not handle battery pack, switch, or machine with
wet hands. Do not expose to rain or allow liquid to
enter the motor compartment.
8
13
WARNING
WARNING