Publicidad
Idiomas disponibles
Idiomas disponibles
Gear check:
If the spread is not even, check that the front of the transmission is in line with the front of the machine.
Checking the spreading disc:
The spreading disc should rotate counterclockwise.
If the gearbox is reversed, the disc will rotate clockwise, which is undesirable.
Clean the disc plate after each use to remove any fertilizer residue that may contribute to uneven spreading.
Setting the spreading intensity.
Set the lock slider in the appropriate place on the scale as needed. Move the adjustment lever to the slider.
The higher the value on the scale - the more material will be spread.
Check the spreader before each use - that the wheels and the spreader disc rotate properly.
3.4.
Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
After each cleaning, all parts should be thoroughly dried before the device is reused.
c)
Store the appliance in a dry and cool place protected from moisture and direct sunlight.
d)
Perform regular inspections of the unit checking technical fitness and any damages.
e)
Use a soft, damp cloth for cleaning.
f)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) as they may damage the surface
of the material from which the appliance is made.
g)
Do not clean the unit with acidic substances, medical agents, thinners, fuel, oils, or other chemicals. It
may cause damage to the device.
h)
Wash the spreader after each use.
i)
Wheel axles must be lubricated regularly.
EN
A - lock slider
B - adjustment lever
Publicidad
