AENO EK7S Guia De Inicio Rapido página 7

Heating and
maintaining the
set temperature
without boiling
for 24 hours
WARNING! If you unintentionally turn on the kettle without water, it will turn
off automatically. Wait for the kettle to cool down before filling and turning it
on again, otherwise the kettle will be blocked by the safety mechanism.
Note: You can interrupt the heating or holding temperature process by
pressing the power button (6) again or by removing the kettle from the stand.
Control the device via the AENO mobile app
WARNING! Make sure your phone is connected to a 2.4 GHz Wi-Fi network.
 Connect the device to the power supply and turn it on.
 Log in to your account in the AENO app or register a new one by
downloading the mobile app from Google Play or the App Store.
 On the main application screen, tap "+" or "Add device". In the window that
opens, select the category "Kettle".
Note: When system requests appear to enable any functions on your
smartphone, follow the recommendations indicated in them.
 Enter your Wi-Fi network name and password if they are not filled in
automatically and click "Next".
aeno.com/documents
set the desired temperature (+40 °C, +55 °C, +80 °C or
+90 °C). The indicator (8) will light up.
 After the water boils, the indicator (7) will go off, the
indicator (8) will start blinking. When the kettle
reaches the set temperature it will beep three times
and go into temperature maintenance mode
 Fill the kettle with water (see instructions in section
"Boiling").
 Use the "+/-" button (9) to set the desired temperature
(+40 °C, +55 °C, +80 °C or +90 °C). The indicator (8) will
light up.
 When the kettle reaches the selected temperature, it
will beep three times and go into temperature
maintenance mode
7