Publicidad
Idiomas disponibles
Idiomas disponibles
Overdischarge protection
When the battery capacity is not enough, the tool or
machine stops automatically and an indicator lamp
blinks when you press the power button. In this case,
remove the battery from the tool or machine and charge
the battery.
Low battery indication lamp of
Adapter for 36 V - 40 V max
Optional accessory
This adapter features the indication lamp that notifies
you of low or no battery capacity.
When the indication lamp is blinking, the remaining
battery capacity gets low.
When the indication lamp lights up, the battery capacity
is depleted or battery protection system is activated.
NOTE: When using the tool/machine continuously,
tool/machine may automatically stop without blinking
the indication lamp.
NOTE: The timing when the indication lamp blinks
varies depending on the ambient temperature and
battery status.
Fig.5
► 1. Low battery indication lamp
Using the adapter pocket
CAUTION:
Do not use this unit with the cord
fixed using the hook and loop fastener of the
adapter pocket.
You can put the adapters into the adapter pocket as
shown in the figure.
Fig.6
► 1. Adapter 2. Adapter pocket
ASSEMBLY
CAUTION:
switched off before carrying out any work on the
unit.
Assembling the unit
1.
Insert the base plate into the plate of the shoulder
harness.
Fig.7
► 1. Plate of shoulder harness 2. Base plate
1
2.
Determine the position of the base plate according
to your height by referring to the table.
7
7 7
6 6
6
5
5 5
4
4 4
3
3 3
2 2
2
1
1 1
1
2
Fig.8
8 ENGLISH
Always be sure that the unit is
7
7 7
6
6 6
5
5 5
4
4 4
3
3 3
2
2 2
1
1 1
1
2
Publicidad
