Lucibel OVE Manual Del Usuario página 24

OPERATING
THE BEAUTY
MASK
Place the mask on a flat, stable surface and
plug it into a power outlet (for optimal and
safe use, we do not recommend using a
socket strip).
Adjust the protective goggles on the face
so that the eyes are fully protected during
photobiomodulation sessions.
Place the face inside the mask. The nose
must touch the wall.
If needed, adjust the position of the mask
by moving the flexible cable.
Press the button once (short press) to turn
the beauty mask on.
The session is programmed to last for 12
minutes, alternating flashes and steady
light.
After the session, the mask turns off
automatically. To turn off the mask
during a session, hold the button down
for 3 seconds.
After use, disconnect the mask from the
power supply.