CARLO GAVAZZI DCT1 Serie Manual Del Usuario página 11

Maintenance and disposal
Troubleshooting
Note: in case of other malfunctions or of any failure, please contact the CARLO GAVAZZI branch or the distributor for your country
Problem
The values are not the expected ones
Exported energy meters (kWh-) don't
increase
Communication problems
Problem
No communication can be established
with the analyser
Cleaning
Disconnect the power supply and loads before cleaning. To keep the device clean, use a slightly wet cloth. Never use abrasives or
solvents.
Responsibility for disposal
Dispose of the unit by separately collecting its materials and bringing them to the facilities specified by government
authorities or by local public bodies. Proper disposal and recycling will help preventing potentially harmful consequences
for the environment and for people.
Download
This manual
DCT1 datasheet
DCT1 installation manual https://gavazziautomation.com/images/PIM/MANUALS/ENG/DCT1_IM_INST.pdf
UCS Software
Cause
Electrical connections are incorrect
Measurement mode is set to A (default
setting)
Cause
Communication settings are incorrect
Communication connections are incorrect
The settings of the communication device
(third-party PLC or software) are incorrect
https://gavazziautomation.com/images/PIM/MANUALS/ENG/DCT1_IM_USE.pdf
https://gavazziautomation.com/images/PIM/DATASHEET/ENG/DCT1_DS_ENG.pdf
https://www.gavazziautomation.com/images/PIM/OTHERSTUFF/ucs.zip
Possible solution
Verify the connections
Set Measurement mode from A to B in
UCS
Possible solution
Check the set parameters
Verify the connections
Check the communication with the UCS
software
DCT1 - User manual | 22/06/2023 | CARLO GAVAZZI Controls SpA 11