Uline H-10795 Guia De Inicio Rapido página 2

4. Align wall mount unit with wall unit screws. Secure with
previously removed nuts. (See Figure 3)
Figure 3
5. Clip the wall receiver to the belt end and extend
to opposite wall. (See Figure 4)
Figure 4
6. Using wall receiver as a template, mark the screw
hole locations on the wall. (See Figure 5)
Figure 5
PAGE 2 OF 6
INSTALLATION CONTINUED
7.
8. Insert a wall anchor in each hole, ensuring the
9. Place wall receiver over screw holes and attach
1-800-295-5510
uline.com
Using a 17/64" drill bit, drill two holes in previously
marked locations. (See Figure 6)
Figure 6
anchor is flush with the wall surface. (See Figure 7)
NOTE: This step may require a light tap with
hammer.
Figure 7
using supplied screws. (See Figure 8)
Figure 8
0723 IH-10795