Publicidad
Idiomas disponibles
Idiomas disponibles
The breast does not
5
empty completely
6
Low noise
7
Leaking milk
The breast pump
does not respond and
8
cannot be turned on
Cautions
1. Nuliie breast pump is designed for individual use only. Sharing it with multiple users can compromise their health and safety.
2. To avoid the risk of combustion and explosion, keep the motor away from high temperatures and ignition sources.
3. If you experience little or no breast milk expression or pain while expressing breast milk, please consult a medical professional.
4. Do not immerse the motor in water for cleaning or disinfection, and avoid using steam sterilizers for disinfection.
5. Please use a 5V adapter for charging. If the output voltage of the power adapter exceeds 5V, the level indicator will show "E1"
and the motor will activate over-voltage protection, preventing it from being charged.
6. During the usage and cleaning of the accessories, the parts undergo various temperature changes and exposure to chemical
detergents. We recommend replacement of the parts every 3 to 6 months, and if you notice any damage, please replace them
promptly.
· It is normal for different pumping methods to occasionally leave some milk in the breasts due to
differences in breast structure and pumping frequency and intensity.
· Consider expressing any remaining milk after using the breast pump using another suitable method.
· The breast pump creates suction by inhaling and deflating the pump body, which may result in some
noise. However, this product has been designed to minimize noise, and the decibel level is maintained
within the standard range of approximately 45 to 55 dB.
· Ensure that you are sitting in the correct position for breastfeeding: lean forward at a 45° angle with
your chin tucked into your chest. When using a bottle, hold it upright during and after the feeding.
· Make sure all parts of the breast pump are assembled correctly, especially the connector body
assembly. Align the positioning line to properly fit it into the milk collector.
· Check for any damage or deformities in the parts, and if you find any, please replace them promptly.
· Ensure that the breast pump is fully charged before using it.
· If the issue persists, it might be due to water or milk flowing into the main motor of the pump.
Note: 1. Always remove the pump motor before pouring breast milk. 2. Avoid submerging the pump
motor in water when cleaning to prevent any damage.
· If problems continue and you suspect a malfunction in the machine itself, please don't hesitate to
contact our 24/7 live chat or email us at support@nuliie.com for the best solution.
10
English
Publicidad
