Atlantis MYTAG BXKTAG00 Manual De Usuario página 2

2. Pairing and setting
In order to set the MyTag on pairing mode, carefully withdraw the transparent film that you
will find on the product's back. Once released, the product battery will make contact with a
metallic pin and the MyTag will beep and automatically power on.
Important note: If the MyTag is not paired shortly with a device, it will enter hibernation
mode to save battery. To restart it again, take the battery out and put it back in again 5
times.
When powered on, the MyTag enters pairing mode automatically. To pair it with any of
your Apple devices follow the next steps:
To explain it we have used iPhone screenshots, the process works in the same exact way
no matter the Apple device.
1. Once the device has powered on, place your Apple device right next to the MyTag and
enable your device's Bluetooth.
2. Access the Find My app. You should not need to download it, since the app comes
included in all Apple devices.
3. Once you access the app, tap on the
Items option. This will appear.
5. Tap on Connect. Once it is connected,
choose a name for the item that you will
want to keep track of.
4. Tap on the Other Supported Item option.
Once you do so your device will start looking
for the MyTag via Bluetooth. It should find it
rapidly and display this.
6. When you have chosen the item name, tap
on Continue. Then, the app will also give you
the option to choose an emoji to represent
the item. In our case, we have chosen a key
emoji because we have linked
the MyTag with a keychain.