This machine is compatible with a variety of slicing software on the market such as: LaserGRBL,LightBurn ,and PHECDA APP. This operating instruction is based on the open-

source software LaserGRBL.

1. TF card engraving: Save the file to the TF card by slicing through the LaserGRBL software, and select the required file through the control screen for engraving.

2. USB connection engraving: Connect computer and laser engraver through USB data cable, and control slice engraving through LaserGRBL software.

3. APP engraving: Install the PHECDA APP on your mobile phone, connect your mobile phone to the wifi of the machine, enter the machine's IP in the app, and you can

operate the machine after a successful connection.

①

TF card engraving

Import target image

Select engraving type

Save the slice file to the TF card

Adjust the image size and laser parameters