Deltaco SH-FT01 Manual Del Usuario página 21

1. Control panel
2. LED display
3. Air outlet
4. Fan body
5. Fan pedestal
6. Fan base (2 halves when unassembled)
7. On/off
8. Oscillation (Swinging motion)
9. Speed
10. Timer
11. Mode
12. Connect/disconnect to Wifi/"Deltaco smart
home" app
1. Remove all parts from the package.
2. Remove the 4 screws on the base halves.
3. Put the base together by sliding on one of the
base halves into the slot of the other base half, and
fasten with the screws that you removed in step 2.
4. Turn the fan body upside down and remove the
4 wing nuts from the bottom of the fan pedestal.
5. Attach the assembled fan base to the fan
pedestal and fasten with the wing nuts that you
removed in step 4.
6. Turn the fan right side up and place on a dry and
level surface before using it.
Use
Control the fan either from the control panel, the
remote control, through the app or with your voice.
1. Press the on/off button to power on or off.
2. Press the speed button to increase speed by 1.
Default speed is 5. Speed settings are 1-6.
Current speed will be displayed on the LED
display.
3. Turn off automatically. Press the timer button to
activate timer and increase the hour by 1. Timer
settings are 1-12 hours. Set time will be displayed
on the LED display. When the timer runs out the
fan will automatically turn off.
4. Turn on automatically. Press the timer button to
activate timer and increase the hour by 1. Timer
settings are 1-12 hours. Set time will be displayed
on the LED display. When the timer runs out the
fan will automatically turn on.
5. Press the mode button to changes modes
(Normal/natural/sleep). Normal = the fan works at
selected speed. Natural = the fan simulates natural
wind by changing speed automatically. Sleep = the
fan changes speed by -1 every 30 mins from high
until it reaches low. If the selected speed is low the
fan continues to work at low speed.
6. Press the oscillation button to turn swinging
motion on or off.
7. Unplug the fan from the mains when not in use
or when it is left unattended.
Remote control
1. Insert 2xAAA batteries (not included) into the
back of the remote control.
Note: Do not mix new and old batteries.
2. The remote control functions are the same as
the same as they are on the control panel.
Note: the remote control must be pointed towards
the fan in order to work.
Note B: the button that looks like this:
same as the mode button on the control panel.
3. Please take out the batteries when the fan will
not be used for longer periods of time.
Install
1. Download and install the app "Deltaco smart
home" from Apple App Store or Google Play Store
on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Choose category and then the type of product
from the list.
6. Connect the device to power.
7. If the fan LED does not flash: Reset the device.
If the status indicator flashes: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
The device name will be used by Amazon Alexa
and Google Home.
A N O R D I C B R A N D
is the
21