Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Do not pump flammable, explosive or toxic gases.
•
Do not pump gas that can corrode metals and cause chemical reactions.
•
Do not pump gas that contains dust or moisture.
•
The temperature of the gas to be pumped should not exceed 80°C (176°F) and the ambient
temperature should be between -5°C (23°F) and 60°C (140°F).
•
Do not use the vacuum pump as a compression or delivery pump.
•
Make sure that there is enough oil in the pump, the pump must not be operated without oil.
•
Only operate the product with a power supply that is specified under "Technical data" or on the
type plate.
•
Always use a properly secured and grounded outlet.
•
When unplugging the pump, pull the plug. Do not disconnect the device from the mains by
pulling on the cable.
•
Be careful not to damage the power cord and do not let the pump hang from the power cord.
•
Do not use damaged plugs or sockets.
•
Never insert or pull out the plug with wet hands.
•
Do not connect, disconnect or use a switch when flammable or explosive gases are present.
•
Do not disassemble the product yourself. Repairs should only be performed by a qualified
person. Always disconnect the device from the mains before disassembling it.
COMPONENTS
1
Oil separator
2
Oil filling bore with plug
3
Gas inlet
4
Handle
5
On/Off switch
6
Oil level line
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
7
Oil drain plug
8
Tank
9
Base
10 Electrical components
11 Type label
12 Vane shell
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
