Publicidad
Idiomas disponibles
Idiomas disponibles
ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
Diagnostic Code Check Mode
Service Mode
Definition of Diagnostic Code Check Mode:
- Diagnostic Code Check Mode is to bring up the stored diagnostic codes (refere codes for service
technicians).
How to Enter:
Model : WF455AR*
- To enter the Diagnostic Code Check Mode with code "d" flashing, press the Spin key during
Service Mode.
Model : WF457AR*
- Press "3" on The Service Mode.
Board Input Test Mode:
1. Activate the Service Mode first.
2. Press the "Spin key" key to start Error Code Check Mode with Code "d" flashing.
3. To cycle through the error codes, turn the Rotary Cycle Selector in one direction (either
Clockwise or Counterclockwise).
4. Now, when turning the Rotary Selector Key in the same direction, it shows error codes from the
latest.
5. When turning it in the opposite direction, it shows the error codes in the reverse order.
(Techsheet)WF457AR-03152A_EN_20120404.indd 13
WARNING
WF455AR* : Spin
Diagnostic Code
WF457AR* : 3 Key
13
2012-04-04
12:12:28
Publicidad
