Publicidad
Idiomas disponibles
Idiomas disponibles
10. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting
should not be set here.
3) Press "
". The current clock is displayed. The hour figure flash;
4) Turn "
" to adjust the hour figures, the input time should be within
0--23.
5) Press "
", the minute figures will flash.
6) Turn "
" to adjust the minute figures, the input time should
be within 0--59.
7) Press "
ring twice when the time arrives, then cooking will start automatically.
Note: 1) Clock must be set first. Otherwise,pre-set function will not work.
2) If the pre-set program has been set without the cooking program,
the whole setting will be used as an alarm clock. That means when
pre-set time arrives, buzzer will sound five times only.
11. Inquiring Function
(1) In cooking state, press "
will be displayed for 3 seconds.
(2) In pre-set state, press "
The pre-set time will flash for 3 seconds, then the oven will turn back to the clock display.
(3) During cooking state, press "
for 3 seconds.
12. Lock-out Function for Children
Lock: In waiting state, press "
entering into the children-lock state and LED will display "
Lock quitting: In locked state, press "
denoting that the lock is released, and LED will turn back to the clock stae, "
GB
" to finish setting. ":" will light, buzzer will
", the current microwave power
" to inquire the time for delay start cooking.
" to check the current time. It will be displayed
" for 3 seconds, there will be a long "beep" denoting
" for 3 seconds, there will be a long "beep"
12
" and "
" will light.
" will go out.
Publicidad
