Citrix ADC SDX 26X-50s Serie Manual De Instrucciones página 119

Citrix ADC SDX
El número de serie puede ser útil en caso de que desee ponerse en contacto con el Soporte técnico de
Citrix.
1 3. Ejecute el siguiente comando para mostrar el estado de las
interfaces
2 mostrar interfaz
Ejemplo
1 show interface
2 1) Interface
3 flags=0xc020
4 MTU=1500,
5 Requested:
6
7 Actual:
8 LLDP
9 RX: Pkts(44337150) Bytes(2767558041) Errs(0) Drops(41260552)
10 TX: Pkts(128116) Bytes(9004699) Errs(0) Drops(0) Stalls(0)
11 NIC: InDisc(0) OutDisc(0) Fctls(0) Stalls(0) Hangs(0) Muted(0)
12 Bandwidth thresholds are not
13 2) Interface
14 flags=0x4000
15 MTU=1500,
16 Requested:
17
18 LLDP
19 RX: Pkts(0) Bytes(0) Errs(0) Drops(0) Stalls(0)
20 TX: Pkts(0) Bytes(0) Errs(0) Drops(0) Stalls(0)
21 NIC: InDisc(0) OutDisc(0) Fctls(0) Stalls(0) Hangs(0) Muted(0)
22 Bandwidth thresholds are not
23 3) Interface
24 flags=0x4000
25 MTU=1500,
26 Requested:
27
28 LLDP
29 RX: Pkts(0) Bytes(0) Errs(0) Drops(0) Stalls(0)
© 1999-2020 Citrix Systems, Inc. All rights reserved.
activas:
0/1 (Gig Ethernet
<ENABLED, UP, UP, autoneg, HAMON, 802.1q>
native vlan=1, MAC=0c:c4:7a:41:ea:94,
h59m55s
media AUTO,
throughput
media UTP, speed
throughput 1000
Mode: NONE
Stalls(0)
0/2 (Gig Ethernet
<ENABLED, DOWN, down, autoneg, HAMON,
;
native vlan=1, MAC=0c:c4:7a:41:ea:95,
h00m08s
media AUTO,
throughput 0
Mode: NONE
10/1 (10G
<ENABLED, DOWN, down, autoneg, HAMON,
;
native vlan=1, MAC=68:05:ca:30:e1:40,
h00m08s
media AUTO,
throughput 0
Mode: NONE
10/100/1000 MBits) #10
speed AUTO, duplex
0
1000, duplex
set.
10/100/1000 MBits) #11
speed AUTO, duplex
set.
Ethernet) #17
speed AUTO, duplex
uptime
AUTO, fctl OFF,
FULL, fctl OFF,
downtime
AUTO, fctl OFF,
downtime
AUTO, fctl OFF,
43
802.1q&gt
44
802.1q&gt
44
119