Hisense HCG1600DBT Manual De Instrucciones página 49

1. Plug the power cord into a suitable household outlet. At this point, the buzzer will make a "drip" sound,
and all the indicators on the control panel will blink once before turning off. Only the on/off indicator
light will continue to blink.
2. Press the " On/off " button, and all function key indicators will turn on, as shown in the picture below.
3. Steak function is as follows：Based on Step 2, press the steak key to select the degree of
doneness. The levels of doneness are medrare→med→medwell→welldone. Repeat in this way so
that the selected doneness indicator blinks and the other doneness indicators stay on. After selecting
the steak doneness, press the "Confirm" button, and the machine will enter the preheating state. The
On key indicator, the Confirm key indicator, the steak key indicator and the selected doneness
indicator will stay on. When the preheating indicator blinks and other indicators turn off, the preheating
temperature of the upper and lower plates are displayed, as shown in the following figure.
After the preheating is complete, the buzzer will sound three alerts. At the same time, the preheating
indicator turns from blinking to on, and the indicator for adding food blinks to remind the user to add
the food. After adding the food, press the "Confirm" button and the product will enter the heating state.
When the preheating indicator light and the Add food indicator light are off, the heating temperature
will be displayed on the upper and lower plates, as shown in the figure below
After the heating time of this function is completed, the panel will switch back to Step 2.
4. Other automatic menu functions: In addition to the steak function, there are seven automatic menu
programs, including chicken, burgers, sausages, sandwiches, fish, bacon and vegetables. These
automatic menus operate in the same way. Take chicken as an example - press the chicken key on
the basis of step 2. At this time, the indicator light of the chicken key will blink and the control panel
will display the heating temperature of the chicken function. Press the "Confirm" button, and the
product will enter the preheating state. The on/off indicator, the "confirm" indicator and the "chicken"
indicator will stay on, while the preheating indicator will blink. When the other indicators turn off, the
control panel will display the preheating temperature of the upper and lower plates, as shown in the
figure below:
47