Publicidad
Idiomas disponibles
Idiomas disponibles
AUTO
SPEED
WIFI
WIFI Symbol*
9
8
NOTE: *
means only available for WIFI modes, For more
information, please see the WIFI manual.
1.
Digital Display:
When the timer is not in use,
the operation mode and the set temperature will
be display. Time will be displayed under the timer
setting.
2.
and
Button:
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range: 61 ~88
3.
Power Button:
Turn the air conditioner on and
off.
4. Mode Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
1
NORTH STORM
AUTO
MODE
7
6
5
4
Use these buttons on the
or 16 ~31 .
Cool Mode: The cooling function allows the air
conditioner to cool the room and
air humidity at the same time
button to activate the cooling function. To optimize
the function of the air conditioner, adjust the
temperature and the speed by pressing the button
indicated.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
2
MODE button to set the DRY mode. An automatic
function of alternating cooling cycles and air fan
is activated.
3
Fan Mode:
conditioner is ventilated.
the FAN mode. With pressing FAN SPEED button
the speed changes in the following sequence: Hi,
Med and Lo in FAN mode. The remote control also
the speed that was set in the previous mode
stores
of operation.
Auto Mode: In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL,DRY or FAN).In this mode the fan speed
and the temperature are set automatically
according to the room temperature (tested by
the temperature sensor which is incorporated
in the indoor unit.).
5. Timer Button:
panel and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button
time displayed is to your
button again.
Timer On: When the unit is off, press TIMER
button , set the temperature with
pressing the button
button
a second time
pressing the button
button
a
automatically switch on and will show on the display.
Note: It can be set to automatically turn off or on in
0.5-24
hour increments
buttons will increase or decrease the timer.
The Timer can be set in 0.5 hours increment below
10 hours and 1 hour increment for 10 hours or
above.
The SET light will turn on while setting.
To cancel the
again.
9
. Press the MODE
This function works only when the air
Press MODE button to set
Use these buttons on the control
or
liking
or
, set the rest time with
or
, confirm the setting, then
t
i h
d r
i t
m
e
. Each press of the
function, press the TIMER button
set
and reduces the
until the rest
then press TIMER
. Press TIMER
. Press TIMER
w
l l i
Publicidad
Capítulos
