GadgetMonster GDM-1021 Manual Del Usuario página 8

Example usage with a camera.
Battery
The LED requires 2 pcs AA (1.5V) batteries. When the light brightness
gets lower it means the battery is low.
Open the battery compartment to change batteries.
Place new batteries and close the battery compartment.
Safety instructions
1. Read all instructions.
2. Save this manual.
3. Protect the LED light from moisture and rain. Or it could result in
short circuit, fire hazard or electric shock.
4. Do not open up or try to repair this product by yourself, instead
contact the retailer.
5. Keep out of reach of children.
6. Observe proper precautions when handling batteries. Batteries
may leak or explode if improperly handled.
6A. Use only batteries with matching type for this equipment.
6B. Do not short circuit or disassemble the battery.
6C. Power the product off before replacing the battery.
6D. Do not expose the battery to flame or to excessive heat.
6E. Do not immerse in or expose to water or other liquids.
7. Do not stare into the light.
Cleaning and maintenance
1. Use a soft and dry cloth to clean LED. For difficult stains you can
use a soft cloth with a small amount of neutral detergent and then
wipe off with a soft and dry cloth.
2. Do not use strong cleaning agents, such as thinner, gasoline or
alcohol, because solvents may damage the surface of the product.
3. When you will not be using the LED for longer period of time,
remove the battery and put the product in a cool and dry area for
storage.
8