Publicidad
ENG
User Manual
4. Now fasten the seal to the hook-and-loop fastener. First side "A", then
side "B". Begin in the middle and work all the way to the up and down or
left and right depending on window type.
6. When closing the window take care that the seal does not get stuck on
the window's edge.
7. Open the zip preferably at the position marked with "S" and attach the
exhaust hose.
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is
based on the specifications of the air conditioner. Do not use extension
tubes or replace it with other different hoses, or this may cause a
malfunction. Exhaust host must be not blocked; otherwise it may cause
overheating.
Drainage Instructions
This air conditioner has two drainage methods: manual drainage and
continuous drainage.
Manual drainage
Please note that neither drainage pipes nor drainage hoses are included.
They must be purchased separately. For reference it is a 0.5-inch
drainage hose that would be needed.
When the air conditioner stops after the water is full, turn off the air
conditioner power and unplug the mains power plug.
Notes: Move the air conditioner carefully, so as not to spill the water in
the water pan at the bottom of the AC.
•Place you water container drainage next to side water outlet behind the
body. Unscrew the drainage cover and unplug the water plug, the water
will automatically flow into the water container.
•During drainage, the body can be tilted slightly backwards.
•When the water is discharged, use the water plug, and tighten the
drainage cover.
14
Publicidad
