Function Compatibility Charts; Head Unit Group 1 - Pioneer CD-BTB200 Manual Del Propietário

Section
05 Operating with different
head units
! Since there are a number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
unit vary in great range. Please refer to the in-
struction manual that came with your Blue-
tooth audio player as well as this manual
while operating your player on this unit.
! Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayed on this unit.
! While you are listening to songs on your Blue-
tooth audio player, please refrain from operat-
ing on your cellular phone as much as
possible. If you try operating on your cellular
phone, the signal from your cellular phone
may cause a noise on the song playback.
! When you are talking on the cellular phone
connected to this unit via Bluetooth wireless
technology, the song playback from your Blue-
tooth audio player connected to this unit is
muted.
! Even if while you are listening to song on your
Bluetooth audio player you switch to another
source, the playback of song continues to
elapse.
! Operation varies depending on the type of
your cellular phone and Bluetooth audio
player. Refer to the instruction manual that
came with them for detailed instructions.
Notes
! This unit's phone call reception is on standby
when ignition switch is set to ACC or ON.
! The line-of-sight distance between this unit
and your cellular phone must be 10 meters or
less for sending and receiving voice and data
via Bluetooth wireless technology. However,
the transmission distance may become short-
er than the estimated distance, depending on
the environment in use.
* You can use this function if your cellular phone features voice recognition technology.
26
En
Autogood products internet store http://130.com.ua
! TEL and BT AUDIO are set to the same vo-
lume and the same SLA (Source Level Adjust-
ment) volume. Change the volume value for
TEL or BT AUDIO each time, if needed.
! If the remote control have PGM button, you
can perform following operations with it:
— When selecting TEL as a source, you can
scroll a phone number in the call history.
— When selecting BT AUDIO as a source,
you can pause a song.

Function compatibility charts

Head unit group 1

Controls of Bluetooth telephone
Select TEL/BT AUDIO
Press SOURCE.
as a source
When selecting TEL/BT
Switch between TEL
AUDIO as a source, press
and BT AUDIO
BAND.
When selecting TEL as a
Put the unit in VOICE
source, press and hold
*
ON mode
BAND.
When a call comes in, press
Take a phone call
a.
End a call Press b.
Display the received/
Press c.
missed call history
Display the dialled
Press d.
call history
When displaying the dialled
Select a phone num- or received/missed call his-
ber from the dialled tory, press c or d.
or received/missed If you want to return to the
call history telephone standby display,
press b.
When selecting a phone
Make a call number from the dialled and
received call history, press a.