Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 minutes
NOTE: You must follow all steps to properly assemble fire table. Make sure the gas valve is turned
"OFF" before assembling.
ASSEMBLY INSTRUCTIONS
1. Make sure the control knob (F) for the gas supply
system is turned to "OFF".
2. Place the 20 lb. propane gas tank (not included) on
top of tank holder (D). Turn the preassembled wing
screw on the tank holder (D) clockwise to secure
the tank.
1
F
2
D
Lowes.com/gardentreasures
6
ASSEMBLY INSTRUCTIONS
3. Turn the cylinder valve on the propane
gas tank clockwise to close the gas
supply on the gas cylinder. Attach the
preassembled regulator from body (C)
to the cylinder valve by turning the
regulator coupling nut clockwise by
hand only. Make sure it is fastened
tightly.
4. To install the battery (B), unscrew the rubber
cap of the electric ignitor (G) and place
battery (B) into the battery case. Make sure the
positive pole ("+") faces out toward the cap.
Screw the cap back onto the electric ignitor (G)
tightly.
5. Place the pumice stones (A) evenly in the body (C).
CAUTION
The screen in this fire table MUST be clear and free
of obstructions at all times to ensure proper operation.
Make sure the fire table is covered completely with
pumice stones lest the flame extinguish occasionally.
3
4
B
5
A
C
Lowes.com/gardentreasures
7
G
Publicidad
