GE GFWR4805 Manual Del Propietario E Instalación página 8

Control settings.
[_ Stein Removal Guide Gross Wine Blood Tomoto Dirt)l
Select Cycle and Push Button for Stain Options
Stain Removal Guide
(on some models)
The Stain Removal Guide is pre-
programmed with the ideal wash and
rinse settings to tackle five common
stains: grass, wine, blood, tomato and
dirt. To use this feature, select the
desired wash cycle and then press
the Stain Removal Guide button
until the stain you want to remove is
highlighted. Once selected, press the
Start button to start the cycle.
For some stains, a prewash will be
selected automatically. Be sure to
add liquid or powder high-efficiency
detergent, or the proper wash additive
to the prewash dispenser.
Add a Garment
(-- )
Add A Garment (on some models)
Ifyou need to add a garment after the
cycle hasstarted, pressthe Add a Garment
button and the unit will unlockthe door,
allowing additionalgarments.TheAdd a
Garment feature isonly availablewhen the
LEDis lit on the button.After a certain point
in the cycle,the LED will not be litany longer
and adding a garment isnot allowed.
Light
@
Basket Light (on some models)
The basket light will turn on and remain
on for 5 minutes when the door opens,
Start/Pause button is pressed, or by
pressing the Light button.
The basket light can be turned off by
pressing and holding the Light button.
Volume
Volume
To adjust the volume of the unit, press
the Volume button to select the desired
level.
There are four sound levels including OFF.
NOTE: The volume selected is for both
the buttons and the end of cycle sounds.
B
Lock Control
®
Hold3 Secs to
Lock / Unlock
Lock Control
You can lock the controls to prevent
any selections from being made. Or
you can lock or unlock the controls
after you have started a cycle.
Children cannot accidentally start the
washer by touching buttons with this
option selected.
To lock the washer, press and hold the
Lock Control button for 3 seconds.
To unlock the washer controls, press
and hold the Lock Control button for 3
seconds.
A sound is made to indicate the lock/
unlock status.
The indicator light above the button
will illuminate when the controls are
locked.
NOTE:The Power button can still be
used when the machine is locked.