Speck pumpen BCM 40 Ficha Técnica página 88

Installation
Pos: 80 /Technische Dokumentation/Betriebsanleitung/Installation/Installation @ 0\mod_1427869040467_370.docx @ 27032 @ 1 @ 1
5 Installation
Pos: 81 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Einbauort @ 0\mod_1427869486488_370.docx @ 27047 @ 2 @ 1
5.1 Installation site
Pos: 82 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Aufstellen im Freien @ 0\mod_1427869735350_370.docx @ 27062 @ 3 @ 1
5.1.1 Outdoor installation
 In order to increase the pump's service life, provide simple
weather protection.
Pos: 83 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Bodenablauf muss vorhanden sein @ 0\mod_1427870166005_370.docx @ 27077 @ 3 @ 1
5.1.2 There must be ground drainage
 Calculate the size of the ground drain according to the
following criteria:
– Size of the swimming pool.
– Circulation flow rate.
Pos: 84 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Be- und Entlüftung @ 0\mod_1427870979088_370.docx @ 27092 @ 3 @ 1
5.1.3 Ventilation and aeration
 Ensure sufficient ventilation and aeration. The ventilation and
aeration must ensure the following conditions:
– Prevention of condensation.
– Minimum distance from fan cover to the wall: 50 mm.
– Cooling of the pump motor and other system components,
for example switch cabinets and control units.
– Limitation of the ambient temperature to maximum 40 °C.
Pos: 85 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Körper- und Luftschallübertragung @ 0\mod_1427873018962_370.docx @ 27107 @ 3 @ 1
5.1.4 Structure-borne and airborne noise transmission
 Observe regulations for structural noise protection, for
example DIN 4109.
 Install the pump in a manner which reduces structure-borne
and airborne noise transmission. Vibration-absorbing
materials are suitable bases. Examples:
– Anti-vibration buffers
– Cork lining
– Sufficiently hard foam
Pos: 87 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Platzreserve @ 0\mod_1427876785998_370.docx @ 27122 @ 3 @ 1
5.1.5 Reserve space
Provide enough reserve space to remove the motor unit

backwards from the pump in the direction of the motor fan
and the strainer basket upwards. See dimensional drawing in
the pump data sheet.
Pos: 88 /Technische Dokumentation/Betriebsanleitung/Installation/Einbauort/Befestigungselemente @ 0\mod_1427877318034_370.docx @ 27137 @ 3 @ 1
5.1.6 Fasteners
Fasten pump using screws.

Pos: 90.1 /Technische Dokumentation/Betriebsanleitung/Installation/Rohrleitungen/Rohrleitungen @ 0\mod_1427882317137_370.docx @ 27152 @ 2 @ 1
16 EN 04|2017