Publicidad
Idiomas disponibles
Idiomas disponibles
5
Installation
5.1
Open body model (PV)
The sleeve has not been designed to withstand axial forces.
The pipes must therefore be supported properly so that
neither tension nor compression is caused. Use cross-
tightening for flange bolts. Do not overtighten bolts.
Make sure that no inappropriate items get between the pinch
bars and the sleeve.
Figure 9.
If possible, protect the sleeve from direct sunlight. Direct
sunlight and UV light deteriorate certain rubber qualities;
this must also be considered during normal use.
A lengthwise angle deviation of max. 5º in the pipe is allowed
(Figure 12).
Figure 10.
4PV70EN - 5/2023
Figure 11.
Deviation in the centre line of the pipe (C), (Figure 13):
Size DN (in)
PV 80...100 (3...4)
PV 125...250 (5...10)
PV 300...500 (12...20)
PV 550...1000 (22...40)
Dimension
max. 5 mm (0.2 in)
max.10 mm (0.4 in)
max. 15 mm (0.6 in)
max. 20 mm (0.8 in)
13
Publicidad
