Descargar Imprimir esta página

Maytag MAV-1 Guía De Uso Y Cuidado página 10

Ocultar thumbs Ver también para MAV-1:

Publicidad

Idiomas disponibles

Idiomas disponibles

Using theControls - rlectronic Control Models
Getting Started
1. Add detergent
and additives to the washer.
2. Load the washer.
3. Close the lid.
4. Select the appropriate
cycle and options for the load.
5. Press the Cycle Selector
dial.
6. The Fill indicator
light will illuminate
and the washer
will start to fill.
I
Note:
The lid must be completely
closed in order
I
to operate the washer controls.
I
Select Water Level
Determine
the selected setting based on clothes load
size. Selection should provide sufficient
water to permit
clothes to circulate
freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation
begins. To adjust
the water level, turn the Infinite Water Level control to
reset and then back to the desired setting.
Mini
1/4 Full
Small
1/4-
1/3
Medium
1/3-
1/2
Large
1/2 - 2/3
Super
3/4-
Full
I Note:
Items must circulate
for best results.
freely
Hot/Cold
White and heavily soiled, color-fast
(select models)
items.
Warm/Warm
Moderately
soiled, colored items.
(select models)
Warm/Cold
Moderately
soiled, colored items;
(select models)
most wrinkle-free
items.
Cold/Cold
Brightly colored, lightly soiled
items; washable woolens.
Automatic
Temperature
Control [A.T.C.]
provides
the optimal wash water temperature
for cleaning. To
save energy, this washer will regulate wash water
temperatures
by mixing hot and cold water to reach
the proper water temperature.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing
and cold water or warm water
(select models) for rinsing. Use the chart as a guide.
These settings feature Automatic Temperature Control:
Saves energy by adding cold water
ATC Hot/Cold,
to the hot water from your water
ATC Warm/Cold
ATCWarm/Warm
heater. Provides optimum
cleaning
(select models)
at lower temperatures.
May add hot water to the incoming
cold water as the washer fills. This
ATC Cold/Cold
assures that the water will be warm
enough to properly activate detergent.

Publicidad

loading