GE AEM10 Manual Del Propietario Y Instrucciones De Instalación página 10

Installation Instructions
141ATTACH THE TOP MOUNTING
RAIL SEAL STRIP
Remove the backing from the top mounting
rail seal strip and attach the seal strip to
the bottom of the top mounting rail, along
the front edge. Allow the seal strip to
overlap 3/8" on each end.
3/8"
Top mounting rail
Remove
backing
seal
strip
3/8"
FRONT VIEW Top mounting rail
[ i
3/8" overlap Seal strip 3/8" overlap
[] INSTALL THE
SIDE ACCORDION PANELS
[A1 Slide the left and right accordion panels
into the top and bottom mounting rails.
['_ Attach the accordion panels to the case
using 3 Type A screws on each side.
Top mounting rail
Accordion
panel
\\
\.\
\\
\\
BACK
Bottom mounting rail
[] INSTALL THE TOP MOUNTING
RAIL ONTO THE CASE
Attach the top mounting rail onto the top
of the case with 3 Type B screws.
)e B
screws
171PREPARE THE WINDOW
• Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
INSIDE
10