Project Source W1530R Instrucciones De Ensamblaje página 7

ASSEMBLY INSTRUCTIONS
4. Insert the shelf support hardware on the required
hole
Hardware Used
Shelf support clear
EE
5. Using a phillips head screwdriver, attach the
mounting plate as shown in the illustration.
Hardware Used
CC Hinge mounting plate
6. Insert the hinge in the bore hole. Using a phillips
head screwdriver, turn the pre-installed screws
clockwise to lock into place.
Place the bumper on the door as shown.
Hardware Used
DD
105 o Hinge
FF
Bumper 2MM
4
x 8
5
x 2
6
x 2
x 2
7
EE
CC
DD
FF