Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
DESCRIPTION
Portable air impact wrench.
INTENDED USE
Assembly power tool for threaded fasteners.
COMPRESSED AIR SUPPLY
Maximum permissible pressure: 7,6 bar
Working pressure: 6,3 bar
SYSTEM COMPONENTS
View figure Fig.1.
GENERAL INSTRUCTIONS
Read the operating instructions of the
pneumatic tool.
L Before use, place a few drops of oil in the
air inlet of the pneumatic tool.
L Fit a standard male fast connection for
compressed air to the threaded hole.
L Clean the air filter from time to time.
HANDLING
L Counter clockwise rotation (loosening):
Depress the inverter lever "I"
Fig.3-A) and push the trigger "C".
L Clockwise rotation (tightening): Lift the
inverter lever "I"
push the trigger "C".
ENGLISH
12
OPERATING AND MAINTENANCE MANUAL
(view figure
(view figure
Fig.3-B) and
LUBRICANT
Hammer
mechanism
(Molykote® BR2 PLUS)
Air motor lubrication: Oil for pneumatic tools
ENVIRONMENTAL CONDITIONS
Temperature: -5 ° C ÷ + 45 ° C
Storage temperature: 0 ÷ + 40 ° C
Air humidity: <80%
Max Altitude: 2000m from sea level
L To prevent rust and reduce wear, clean and
oil the pneumatic tool after use.
L Store the pneumatic tool in a clean and dry
place.
L Supply only with dehumidified compressed
air with no pollutants.
L Power adjustment: Rotate the regulator
level to the desiderate level indicator
figure
Fig.5). The power setting indicators
are for reference and don't indicate a
specific power.
lubrication:
Grease
(view
Publicidad
