Hitachi Koki CJ 160V Instrucciones De Seguridad Y Manual De Instrucciones página 9

6. Changing blades
(1) Pull the lever in the direction indicated by the arrow. (Fig. 2-І)
(2) With the lever pulled, insert the blade until it butts against the outlet of the blade holder tip.
(Fig. 2-ІІ)
(3) Release the lever. (Fig. 2-ІІІ)
Lever
Blade
holder
Roller
Fig. 2-І
CAUTION
● Be sure to switch power OFF and disconnect the plug from the receptacle when
changing blades.
● Do not touch the lever when plunger is moving.
NOTE
○ Confi rm the protrusions of blade inserted to the blade holder surely.
○ Confi rm the blade located between the groove of roller. (Fig. 3)
Blade
Fig. 2-ІІ
Fig. 2
Blade
Roller
Roller
Fig. 3
Blade
holder
Fig. 2-ІІІ
Blade
English
Plunger
Roller
9