Scheppach HF50 Manual página 27

• 1x moving stop (12)
• 1x base body (13)
• 2x horizontal stop support (14)
• 2x vertical stop support (15)
• 2x fastening clamps (16)
• 2x stop bars (17)
• 1x holder for pressure bar, top (18)
• 1x holder for pressure bar, front (19)
• 1x suction adapter (20)
• 1x protective cover (21)
• 2x push grip (22)
• 1x open-end spanner, size 19 (23)
• 1x open-end spanner, size 24 (24)
• 1x Allen key, 4 mm (25)
• 1x Allen key, 5 mm (26)
• 1x operating manual
Assembly material
• 2x star grip screw M6x20 (a)
• 11x star grip nut M6 (b)
• 4x wing nut M6 (c)
• 2x hexagonal nut M6 (d)
• 1x cap nut M6 (e)
• 8x hexagonal nut M5 (f)
• 2x hexagonal bolt M6x40 (g)
• 6x hexagon socket screw M5x12 (h)
• 8x hexagon socket screw M5x20 (i)
• 1x carriage bolt M6x40 (j)
• 4x carriage bolt M6x35 (k)
• 6x carriage bolt M6x25 (l)
• 4x carriage bolt M6x20 (m)
• 2x Phillips screw M5x10 (n)
• 15x washer, large Ø6 (o)
• 2x washer, rubberised (p)
• 2x washer, small Ø6 (q)
• 6x washer, large Ø5 (r)
• 10x washer, small Ø5 (s)
• 16x spring washer Ø5 (t)
• 1x collet Ø6 (u)
• 1x collet Ø8 (v)
• 1x pin Ø6x35 (w)
4. Proper use
The machine is intended exclusively for the following
activities: Working with materials made of wood and
plastic, such as e.g.: Milling grooves, machining re-
cesses, copying curves and lettering within the spec-
ified machine limits. The milling machine must not be
used for working on metal, stone, etc.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the prod-
uct.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our products were not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the product is used in
commercial or industrial applications, or for equivalent
work.
The manufacturer is not liable for damage caused by
an improper use or incorrect operation of this device.
5. General safety instructions
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury and fire.
Read all these notices before using the power tool and
store the safety instructions well for later reference.
Safe work
• Keep the work area orderly
– Disorder in the work area can lead to accidents.
• Take environmental influences into account
– Do not expose power tools to rain.
– Do not use power tools in a damp or wet envi-
ronment.
– Make sure that the work area is well-illuminated.
– Do not use power tools where there is a risk of
fire or explosion.
www.scheppach.com GB | 27