DeLOCK 61971 Manual Del Usuario página 3

Driver Installation
Note:
Follow the general instructions for installation of the product. If necessary, read
the manual of your computer, or ask a specialist for help.
Mac OS 10.7, Mac OS 10.8
1. Connect your SATA 22 pin device to the converter.
2. Connect the power supply to the converter.
3. Now connect the power supply to the power outlet.
4. Switch on your computer.
5. Connect an optional Thunderbolt™ cable to the converter.
6. Now connect this Thunderbolt™ cable to a free Thunderbolt™ port of your
computer.
7. There is no driver required, so the device is ready to be used.
Windows 7/8 (32/64-bit)
Please note:
For Windows: the Thunderbolt™ certified driver needs to be installed
before you connect the device.
1. Switch on your computer.
2. Put the driver CD in the CD ROM drive and open it. Start "Setup.exe" by
"double click".
3. Follow the instructions of the driver installation.
4. Restart your system after the installation.
5. Connect an optional Thunderbolt™ cable to the adapter and a free port of
your computer.
6. The external drive will be recognized and you can start using the device
immediately.
You can also download the driver from our homepage:
http://www.delock.com/produkte/G_61971/treiber.html
- -