Marmitek TVAW4K RX Guía Rápida página 2

Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
• Only for indoor use.
• Do not use the product in a damp environment or
near water.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Never connect a power adapter if it's damaged. In
such cases, please contact your supplier.
• Disconnect the AC/DC power adapter from the mains
when this device is not in use for prolonged time.
• Never open the product: the device may contain parts
with deadly voltage.
• Repairs or service should only be performed by
qualified personnel.
• Improper use, self-installed modifications or repairs
will void any and all warranties.
• Marmitek does not accept any product responsibility
for incorrect use of the product or use other than for
which the product is intended..
Requirements
To use this device, you need a TV Anywhere
Wireless 4K set.
Installation
In order to use this device, you will need to pair the 4K
receiver to the 4K transmitter.
1. Connect the HDMI output of the 4K receiver to the
HDMI input of the TV or projector.
2. Power on the 4K receiver and wait until the
Marmitek logo is shown on screen.
3. Press and hold the 4K receiver's reset button for 5
seconds until the indicator light is flashing fast.
4. Wait for 30 seconds. After this, the 4K transmitter
and 4K receiver will be paired.
Declaration of Conformity
Hereby, Marmitek BV, declares that the TVAW4K RX is in compliance with the essential requirements of the
2014/53/EU, 2011/65/EU and (EU) 2019/1782 Directives.
Full Declaration of Conformity is available at
Notes for using the product
•
The TV Anywhere Wireless 4K supports 'multiple RX'
modus, which makes it possible to watch the same
HDMI video content on multiple displays.
•
One 4K transmitter supports up to four 4K receivers.
Frequently asked questions (FAQs)
Please go to
questions.
Technical specifications
Connections receiver
Input
Output
Video
Supported resolutions
2160@60 Hz)
HDMI standards
Audio
Supported audio
Technology
Operational frequency
Range
Latency (lag)
IR frequency range
Housing and environment
Dimensions
Weight
Ambient temperature
Humidity
Power supply
External power adapter
Power consumption(max)
www.marmitek.com/en/declarations-of-conformity/
www.marmitek.com if you have any
2x USB-A (female)
1x HDMI (female)
Max. 4K60 (3840 x
HDMI 2.0, EDID and
HDCP 2.2
2CH PCM audio, 16bits –
44.1KHz
5 GHz
Up to 150 meters clear
field and up to 50 meters
through floors and walls
<100ms
30 ~ 60kHz
155 x 77 x 22 mm
320 g
0 ~ 40° C
10% ~ 80%
100-240VAC @50-60Hz,
5VDC @ 2A
7W