Laevo V2.6 Instrucciones De Uso página 12

QG-5: Attach the torso structures to the smart joint
5.5
1.
Push the 'structure lock button' of the left smart joint.
2. Move the left torso structure in the hole to a comfortable height setting.
3. Rotate the indents towards the button to make sure the parts can lock.
4.
Release the button.
5.
Repeat for right side.
2 NOTICE:
6 WARNING! Bending with unlocked parts
Risk of sudden loss of support
Pull lightly on all structure ends to make sure all ends are locked.
f
QG-6: Attach the torso structures to the chest pad
5.6
1. Use the Torso Structure with indicator "L" for the left side of the body.
2.
Push the button on the left side of the chest pad.
3.
Move the structure in the hole to a comfortable width setting. There are 3 width settings.
4. Release the button.
5. Repeat for the right side.
2 NOTICE:
12
Make sure left and right have the same height setting.
Make sure left and right have the same width setting.
V2.6