Bosch Nexxt 800 Serie Operacion, Cuidado E Instrucciones Para La Instalacion página 16

Select the option to be changed with
the "Menu" button. Press the button to
jump to the next option on the display.
The active symbol starts flashing.
The current active option setting is
displayed on the right.
These settings can now be changed
with the "Select" button. Press the
button to jump to the next possible
setting.
[_ Pressing the "Menu" button again,
saves the previously settings.
If you don't press any button for 10
seconds the settings are saves
automatically.
Start Delay @
[_lf you have chosen the additional
option "Start Delay" the symbol _
is displayed.
Extra care
_
[_lf you have chosen the additional
option "Extra care" the
"Delicates/Iow temp." indicator
light illuminates.
Pressing the "Delicates/Iow temp."
button cancels the additional
option "Extra care".
[_lf you have chosen the additional
option "Extra care" the symbol
is displayed.
Safety guard .-0
This additional option allows you to lock
your settings to prevent unintended use
of the dryer.
To start the dryer when the Safety
guard is active:
Press and hold the "Start/Stop"
button for 4 seconds.
To unlock this additional option when
the dryer is running:
Press and hold the "Start/Stop"
button for 4 seconds.
[_ When the dryer is running and the
"Safety guard" is active, the dryer
can be stopped by pressing the
"Start/Stop" button for 4 seconds.
[_lf you have chosen the additional
option "Safety guard" the symbol
_o is displayed.
Degree of dryness
The residual moisture can be
individually reduced in 3 steps.
1, 2, 3: programs are lengthened
[_lf you have chosen the steps 1 to 3
of the additional option "Degree of
dryness" the symbol -:0:-is
displayed.
0 is standard setting - symbol -:0:-is
not displayed.
Volume of the signal I_
Your dryer outputs different signals.
Signal Type Comment
Sta_t Shorttone Adjustable
volume
Dampdry Sequence of Adjustable
medium volume
lengthtones
End Sequence of Adjustable
shorttones volume
Mal- Sequence of Adjustable
operation 10ng tones volume
Warningof Sequence of Maximum
mal- 10ng tones volume
function
You can change the volume of the
adjustable signals:
Press and hold the "Select"
button.
- off
m
- - - increasingly
- - - maximum
Spin Speed (_
To optimize the remaining time display,
the spin speed at which the laundry
was previously spun in the washing
machine can be entered.
[_The ®-symbol is only displayed for
adjustment.
Options
Start Delicates Extended
Delicates/low temp.
Press the "Delicates/Iow temp." button
for temperature sensitive textiles.
Observe the care information or
symbols on the textiles. The
temperature of the drying process is
reduced, the drying time is extended.
[_For extreme temperature sensitive
textiles
(e.g. camisoles, paints) press the
"Delicates/Iow temp." button and
set additional option Extra care
(see Page 15) to reduce the
temperature of the drying process
another time.
Extended Wrinkle Block
To prevent the laundry from creasing,
the dryer drum rotates at specific
intervals following the drying program.
Standard setting for this function is 1
hour.
If the "Extended Wrinkle Block" button
is pressed, this function is extended to
3 hours.
The laundry remains loose and fluffy
until it is removed. The laundry should
be removed at the latest affer this time
has elapsed.
Indicator of program
sequence
The dryer uses an electronic scanning
system for all programs except the time
programs and the special "Wool Care"
program. A moisture sensor
continuously checks the moisture in the
laundry. Drying ends automatically as
soon as the selected degree of dryness
has been reached.
The drum continues to rotate at
specific intervals for one hour to
prevent creasing.
The current state of the process and
the level reached during the program
sequence is indicated via indicator
lights (Drying, Damp dry, Regular dry,
Wrinkle block).
OLint filter
iT] f the indicator light "Wrinkle block"
illuminates when the program
selector is in Off-Position - turn off
the circuit breaker and call for
customer service!
16