Publicidad
Idiomas disponibles
Idiomas disponibles
'SP6553
EngSpa
Manual
68192
7/8/04
9:2Q_AM
Paqe
5
Location
Instructions
(continued)
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air away
from home thermostat and hot air registers.
It is best to position humidifier next to an
inside wall. Hot air registers and cold air
from outside walls can affect the efficiencies
of the controls. Unit should not be placed
where warm air from a hot air register blows
directly on unit.
Moist air (humidity) produced will disperse
into the whole house, but area closest to the
unit will have the highest humidity. If the unit
is positioned close to a window, condensa-
tion may form on the window pane. If this is
not appropriate the unit should be reposi-
tioned in another location.
Step 2
The humidifier should be positioned with the
back (cord exit side), at least 2 inches away
from the wall. Air needs to enter through the
Iouvres in the rear panel in order for the
humidifier to operate at peak efficiency.
At Least 2" From Wall
_
Caster
Pad
T777_7777
_
Carpet
Surface
NOTE:
ff positioning
on
carpet,
place caster
pads
under
front
casters
only
"_'_to
level (if necessary).
Electrical
Hook-Up
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall. With the humidifier in the desired
location, route the electrical cord safely so
no one wilt trip or upset the humidifier.
Hug in the electrical cord.
IWARNtNG:
To reduce the risk of fire
:m
or shock hazard, humidifier
should
be I
plugged
directJy into a t20V A.C. out-
m
let.
De not useextens,en
cords, m
To reduce the risk of electrical shock, this
humidifier has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
plug. If it still does not fit, contact a quali-
fied electrician to install the proper outlet.
Do not change the plug in any way.
Water Fill
WARNBNG:
To reduce
the risk of shock,
always
unplug
humidifier
before
clean-
ing or servicing.
WARNUNG: To reduce the risk of fire or
shock hazard, do not pour or spill water
into control
or motor
area. Close the
control
cover,
ff controls
get wet, let
them
dry
somp_etemy and
have
unit
checked
by an authorized
service
per-
sonnel before plugging
in.
Fan Assembly
/
Pivoting
/
Lid
BottJes
This humidifier is designed for use with the
two water bottles that are located under the
pivoting lid.
Open
the pivoting
lid of the humidifier.
Remove the water bottles by lifting them
straight up and out of the cabinet.
Publicidad
