Troy-Bilt 020242 Manual Del Propietário página 7

Section 3: Assembly
2. Insert carriage boHt through Heft side hoHe from outside
of unit and attach a pHastic knob from inside of unit
(viewing from rear of unit).Tighten by hand (Figure 2).
4. PHaceaccessory tray over holies on handHe (viewing
from front of unit). Push the tree chips into the holies
untiH they sit fiat against the accessory tray (Figure 3).
3,
Insert"L" boHtsthrough holieson right side of handHe
(viewing from rear of unit). HoHdboHtsin pHace and
attach pHastic knobs from inside of handHe(Figure 2).
Tighten by hand.
/
/
Insert muHti-coHored ProiectPro TMnozzHes and other
suppHied accessories in spaces provided in accessory
tray. See "How to Use AccessoryTray".
Add Engine Oil and Fuel
° Race pressure washer on a HeveH surface,
• Refer to engine manual for oil and fuel fill information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
" Refer to engine owner's manuaH and foHHowoiH and fueH
recommendations and instructions,
NOTE: Check oiH often during engine break-in. Refer to
engine owner's manuaHfor recommendations,
0