Publicidad
Idiomas disponibles
Idiomas disponibles
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• If equipped
with a temperature
selector knob. be sure it is set directly on a temperature
setting and not between
set-
tings.
• Make sure temperature
selection is correct.
• Make sure hoses are connected
to correct faucets
and inlet connections.
Be sure water supply
is regulated
correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a mininmm
120°F (49°C) hot water at the tap. Also check water
heater capacity and recovery
rate.
• Discolmect
hoses and clean screens. Hose filter screens may be plugged.
Notes
Publicidad
