Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
F
f
Tool Storage Chest
PROFESSIONAL
SERIES
THIS OPERATING
INSTRUCTION
MANUAL
COVERS ALL PROFESSIONAL
SERIES
CHESTS.
706.139920
Please indicate the following information from the
service part drawing provided.
Model Number:
Model Description:
CAUTION:
Read and follow all Safety Rules
and Operating Instructions before first use of
this product. Retain this document for future
reference.
Sears, Roebuck and Co.
Hoffman Estates, IL 60179 U.S.A.
F888A12
,J
f
SAFETY RULES AND WARNINGS:
• DO NOT stand on this product. You may fall which may cause personal injury.
• Stacked products should be bolted together. The products could become unstable and tip,
which may cause personal injury or product damage.
• WEAR SAFETY GLASSES when removing or repositioning the slides. The tool could slip
which may cause personal injury.
• When the cover is opened, be sure the cover stop is in the locked position. This will
prevent accidental closure and personal injury.
• BE CAREFUL when closing the cover. Remove hands before the cover closes completely
to prevent personal injury.
• BE CAREFUL when opening more than one drawer. The product may become unstable
and tip, which may cause personal injury or product damage.
• DO NOT mount this product on a truck bed or any other moving object. This may cause
personal injury or product damage.
• DO NOT step in the drawers. You may fall which may cause personal injury.
• Appropriately secure this product before moving it with a forklift.
• Close the cover and lock the drawers and doors before moving this product. The drawers
or doors could come open and make the product unstable and tip, which may cause
personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external Iockbars or
attach electrical equipment. This may cause product damage or personal injury.
• WEAR SAFETY GLASSES
AND BE CAREFUL when moving the cover rods. The rod
could spring out of the hole, which may cause personal injury.
• When locking this product, close the drawers before closing the cover for Iockbars to work
properly.
• Spread the weight out evenly in the tote trays. If the weight is not spread evenly, the
contents could shift and fall out, which may cause personal injury, and/or damage to the
contents or tote tray.
The maximum weight for each drawer should be no more than 50 pounds.
Call 1-800-366-7278
for Service
Parts
Refer to Service Parts Drawing
for full listing of Service
Parts
J
DRAWER
REMOVAL:
• Fully extend the drawer. Push it back a quarter of
an inch.
• Insert a screwdriver into the slot in the slide and push
in on the stop until it clears the lance. Repeat the
Lubricate YI_
procedure on the other slide and remove the drawer.
• To reinstall the drawer, pry the stop far enough out to engage the lance and push the
drawer onto the slides until the stops pass over the lances.
Slot
/-Stop
Lance
LUBRICATION:
Lubricate the top and bottom channels of the drawer slides at least twice a
year.
REPOSITIONING
THE COVER
RODS: The cover rod can be repositioned for
customized storage needs.
• Hold the rod firmly at both ends. Slide the rod to one end and flex the center portion of the
rod until its end is free of the hole.
• Insert the rod into an alternate hole location and reverse this procedure. WEAR SAFETY
GLASSES and use extreme caution during this procedure.
Publicidad
