Costway GT3665DE Manual Del Usuario página 22

1. Open the box and find the below three parts as shown
-- Cutting Head x1
-- Pole Assembly x1
-- Handle x1
-- Instruction Manual x1
2. Assembly of the handle and Pole
a) Take out the Pole Assembly and the Handle
b) Unscrew the Shaft Coupling 3(3) by anti-clockwise direction and
pull out the Extension Pole 4 until the desired length and screw by
clockwise to lock the Shaft Coupling 3(3).
NOTE: the extended pole 4 should be longer than 15cm (5.9 inches)
c) Tighten the shaft coupling 3(4) by clockwise direction with screw.
d) Plug the extended Aluminum Pole into the handle.
Now the pin has been locked in the hole of handle and handle won't
come off.
e) Tighten the shaft coupling 3(4) by clockwise direction with screw.
At this step, the connection between handle and pole is finished.
Fig b)
Fig d)
ASSEMBLY OF THE MACHINE
22
Fig c)
Fig e)